TO GOD BE THE GLORY

ASHLAND COUNTY

 

Page updated 02/26/2021 by REMI

To GOD be the Glory

Electrical permit and inspection application page

REM Inspecting LLC (REMI) is the Electrical Inspection Agency designated by DSPS for the issuing of Electrical Permits and Performing Electrical inspections in this COUNTY.

 

  • FEES:
    • REMI will review the application and supporting information and then send you an email with the listed fees to be paid.
      • If you need an estimate for a Bid or quote contact us directly or use these quick estimating tools
      • Note:
        • use of the quick estimating tools does not obligate REMI to meet your estimates an any way.

Additional fees:

      1. Each re-inspection due to non-compliance.
      2. Work not included in the original permit.
      3. Payments using a credit card.
      4. Inspections performed on Saturdays, Sundays, State of Wisconsin holidays and at times other than scheduled in at the request of the permit application shall be billed at 1.5 times the inspector re-inspection rate.
      5. All fees for inspections not paid within 60 calendar days after the first invoice date may be assessed a late payment fee equal to one percent per month of the outstanding balance.
      6. Note: No other inspections shall occur until payment is received in full for any outstanding additional fees.
  • PAYMENT:
    • REMI will review the application and supporting information and then send you an email with the listed fees to be paid
    • A permit or inspection will not be approved unless fees are paid in full.

 

 

  • INSPECTIONS:
    • The building owner or their agent shall notify REMI online at https://reminspecting.com/electrical-inspection-application/ when the electrical wiring installation is ready for inspection.
      • Note: all inspection requests must be entered into the REMI inspection tracking database via our website listed above.
        • You can call our office 715-497-3458 and work with our employees to assist you with entering your request into the REMI database.
        • A voice mail will not be accepted as the inspection notification.

 

SPS 316.012 Permits. (1) (a) Except for an electrical wiring project described in s. 101.875 (2), Stats., and as provided in par. (b), no electrical wiring project may commence unless the owner of the premises where the installation is to occur or their agent holds a permit from the designated inspection agency if the project involves the installation of new or an addition to any electrical service, feeder, or branch circuit serving any of the following: 1. A farm. 2. A public building, structure, or premises. 3. A place of employment. 4. A campground. 5. A manufactured home community. 6. A public marina, pier, dock, or wharf. 7. A recreational vehicle park.

(b) Under emergency conditions, the necessary electrical wiring may commence without obtaining a permit, provided the owner of the premises where the installation is to occur or their agent submits a permit application to the inspection agency designated by the department to provide electrical inspections for the installation no later than the next business day after commencement of the installation.

SPS 316.013 Inspections. (1) Except as provided under s. 101.875 (2), Stats., electrical wiring installations shall be subject to inspection. Note: See s. SPS 320.10 regarding the inspections for the construction of new one− and 2− family dwellings.

(2) Inspections of electrical wiring installations described under s. SPS 316.012 (1) (a) shall be conducted by a certified commercial electrical inspector. Note: See s. SPS 305.62 for certification provisions for commercial electrical inspectors.

(3) (a) The building owner or their agent shall notify the inspection agency designated by the department to provide electrical inspections when the electrical wiring installation is ready for inspection. (b) Except as provided in par. (c), to facilitate inspection all of the following shall apply: 1. Electrical wiring shall remain accessible and exposed for inspection purposes. 2. Electrical wiring may not be energized. (c) 1. The concealment or energizing of electrical wiring, other than an electrical service, may proceed if inspection has not been completed within 2 business days after notification is received or as otherwise agreed between the wiring installer and the designated inspection agency providing the inspection. 2. The notification that an electrical wiring installation is ready for final inspection shall be made to indicate when all electrical fixtures, outlets and face plates are in place and the installation or that portion of the installation is energized. (d) 1. If upon inspection, it is found that the installation is in compliance with this chapter, the certified inspector shall approve the installation prior to concealment or energizing of the electrical wiring. 2. If upon inspection, it is found that the installation is incomplete or not in compliance with this chapter, orders to correct shall be issued. An order may include the condition that the electrical wiring is to remain unconcealed and non−energized until re−inspected.